• Home
  • About
    • Organisation
    • Partners
    • History
    • Testimonials
  • Vision
  • Solution
    • The principle
    • Kite
    • The tether
    • Ground station
    • Control System
  • Market
  • Media
  • Contact
    • Position as VTOL Engineer
    • Position as Control System Engineer
    • Position as Aerodynamic Engineer
    • Position as Operator
    • Position as Aeronautical Engineer
  • Videos
Home

New aircraft developed by Kitemill

A new Norwegian aircraft was flying for the first time in the end of 2016 when Kitemill did its successful test flight at Lista airport. This is the first an aircraft made in Norway is to produce renewable energy.

20161024_152824.jpgPhoto by Thomas, Kitemill

Successful test flight: This is the new Norwegian aircraft developed by Kitemill. They had a successful test flight at Lista airport during Autumn 2016. Now they work with further development of the aircraft so that it is ready for serial production.

The plane was designed based on the kites that Kitemill has developed in the past. These kites, or planes, are the most important component to produce renewable, green and environmentally friendly energy based on Kitemill its competence.

 

It flew as it should

It was an important milestone when we noted that our new aircraft flew as it was planned to fly, says Sture Smidt in Kitemill.

He is the company’s discipline leader for the kite, aerodynamics and structure. It took him slightly more than one year to develop this new aircraft together with the company’s test pilot and kite responsible person, Jo Grini and the rest of the Kitemill team. It was built in Kitemill workshop at Lista by Jo Grini and Andrew Hogg. Andrew was assisting the building and is a microplane technician. Originally, the kite design was done by Philip Kolb. Jo Grini was responsible for the physical construction of the aircraft.

 

Next is series production

The new aircraft has a wingspan of 7.5 meter. The drawings were made by Sture Smidt, Jo Grini and the other employees within Kitemill. The aircraft is mainly composed of strong composite material containing a high fraction of carbon fibers. In this way, the aircraft is built to withstand strong forces in the air, while it is connected to a tether that transmits the kinetic energy to a ground-based drum. This drum is connected to a generator that produces electricity up to 30 kW. Now Kitemill is into developing and optimizing its aircraft even further for maximum performance and adjustment to serial production.

 

I find it very exciting to develop an optimized design for our kites. I work with both the aerodynamics and the structural mechanics design of our flying vehicles, says engineer Sture Smidt. He has been employed at Kitemill since April 2015 and has a long experience within aerodynamics and as a mechanical designer, both for Kongsberg Gruppen within airspace and for Umoe Mandal working with fiber reinforced composites in their new vehicles.

It is very rewarding to work within my field of interest, being airspace products, with design, construction and calculations, says Sture. He works for Kitemill from Moss daily.

 

Built an aircraft as a twelve-year old

Jo Grini was employed in Kitemill during 2013 and works in the project as the RC-pilot and as a result also with the electronics in the kite itself. Jo is an enthusiastic RC-model aircraft pilot with many merits: he was Norwegian champion for 19 times and Nordic champion three times. He built his first aircraft when he was 12 years old.

 

It is thrilling to work in Kitemill, together with so many competent persons that are all very convinced about renewable energy. I get a lot of energy that we share in   this vision and all that is contribute during the discussions, because we always aim for the best and most cost-effective solutions, says the electrician from Fagernes. He says that all listen to each other’s viewpoints, that makes it a pleasure to work in Kitemill. 

25 December 2020 09:30

Successfully passed 125 flights in 2020

After Kitemill's kite number 5 in the KM1 series "Spark 5" completed its first flight in mid-December, the company has completed over 125 flights over Lista in 2020. Kite number 4 in the KM1 series...

28 November 2020 21:21

LIDAR campaign at Lista

In mid-November 2020, PhD student Jan Markus Diezel started measuring the speed of the wind over Lista Airport based on LIDAR measurements. LIDAR is basically the same technology that self-driving ...

23 October 2020 16:02

- Kitemill is truly sector leading

The highly respected Airborne Wind Energy (AWE) expert David Ainsworth is now a senior advisor for Kitemill. The company general manager, Thomas Hårklau, is very pleased that David Ainsworth now is...

18 September 2020 14:34

The KM1 Spark kite automatic launch and landing

A strong focus of engineering of a more robust kite system pays off with great results in our August 2020 test campaings.

15 September 2020 16:10

New QHSE manager with long management experience from Avinor

Otto de Besche is Kitemill's new quality manager, with responsibility for the company's quality, health, environment and safety. He has over 40 years of experience from the air traffic service, Avi...

11 August 2020 09:22

The IEA focuses on airborne wind in large energy workshop

The International Energy Agency (IEA) is now putting a sharp focus on airborne wind energy in a large conference that will be held digitally on 23. and 24. September 2020. On the landing page of th...

Kitemill AS
Evangerveien 3
5704 Voss, Norway

Org. nr. 992 943 718 

Follow us at LinkedIn

Follow us at Facebook

  • Home
  • About
  • Vision
  • Solution
  • Market
  • Media
  • Contact
  • Videos
© Kitemill 2015 - Designed and developed by Knowit Colours